550-sheet tray bellcrank recoil spring removal
1 Remove the 550-sheet tray pick arm bracket assembly. Go to “550-sheet tray pick arm bracket assembly
removal” on page 409.
2 Remove the 550-sheet tray bellcrank recoil spring from the 550-sheet tray pick arm bracket assembly.
550-sheet tray frame assembly removal
Note: The 550-sheet tray frame assembly is not a FRU.
1 Remove the 550-sheet tray pick arm bracket assembly. Go to “550-sheet tray pick arm bracket assembly
removal” on page 409.
2 Release the hooks securing the sensor (pass through) to the drawer.
3 Remove the sensor (pass through) from the drawer.
7462
Repair information
411
To Next Page
Loading...
