Lexmark 7462 series - Action for Prompts

• Envelope Feeder
Note: This is available only in models T650, T652, and T654.
• Manual Env or Manual Envelope (depending on your printer model)
3 Depending on your printer model, touch Submit or press the Select button to apply the changes.
Action for Prompts
This setting determines what action is required from the printer to resolve any paper- or envelope-related
change prompts.
1 From the
Configuration
menu, select Action for Prompts.
2 Select one of the following:
• Prompt User—Printer always requires user intervention to resolve the change prompt. This is the factory
default setting.
• Continue—Printer automatically assumes that the user selects Continue when a change prompt occurs.
• Use Current—Printer automatically assumes that the user selects Use Current when a change prompt
occurs.
3 Depending on your printer model, touch Submit or press the Select button to apply the changes.
Jobs on Disk
This setting appears only if a hard disk is installed. This does not aect held or parked jobs.
1 From the Configuration menu, select Jobs on Disk.
2 Select one of the following:
• Delete—To delete the buered jobs saved on the disk.
• Do Not Delete—To cancel and return to the Configuration menu. This is the factory default setting.
Disk Encryption
This setting appears only if a hard disk is installed. It controls whether the printer encrypts the information that
it writes to the hard disk.
1 From the
Configuration
menu, select Disk Encryption.
2 Select one of the following:
• Enable—To enable encryption of the hard disk.
• Disable—To enable formatting of the hard disk.
3 Select Yes to proceed with the encryption or formatting of the disk.
A progress bar appears on the display that indicates the overall completion of the selected operation.
7462
Service menus
285