Scanner cooling fan removal
1 Remove the scanner platen glass cover assembly. Go to “Scanner platen glass cover assembly removal
(models X651, X652, X654, and X656)” on page 527 or “Scanner platen glass cover assembly removal
(model X658)” on page 527.
2 Disconnect the cooling fan wiring harness from the scanner interface card connector (CN5) assembly.
3 Remove the two screws (A) securing the scanner cooling fan to the flatbed frame.
A
4 Remove the scanner cooling fan while carefully routing the cable out from the
flatbed
frame assembly.
7462
Repair information
509
To Next Page
Loading...
