250-sheet option tray removals
250-sheet media tray assembly removal
Note: This removal procedure can be applied to 250-sheet option drawer assembly.
1 Find the 250-sheet media tray assembly in the 250-sheet option drawer assembly.
2 Remove the 250-sheet media tray assembly from the 250-sheet option drawer assembly.
250-sheet tray pick arm bracket assembly removal
Note: Carefully remove the base machine from the input option tray assembly before proceeding.
1 Disconnect the two 250-sheet tray pick arm bracket assembly cable connectors from the 250-sheet tray
controller card assembly.
2 Detach the pick arm spring from the drawer.
7462
Repair information
404
To Next Page
Loading...
