Lexmark 7462 series - Sheet Tray Option Drive Shaft with Spring Removal

3 Remove the three screws (A) securing the 550-sheet tray controller card assembly to the 550-sheet tray
frame.
A
4 Remove the 550-sheet tray controller card assembly.
550-sheet tray option drive shaft with spring removal
1 Remove the 550-sheet tray frame assembly. Go to “Media size actuator removal” on page 466.
2 Pinch the two hooks (A) on the cap, and detach it from the 550-sheet tray frame.
7462
Repair information
414