5 Look closely at the top edge of the media to see if the sheets are aligned.
Square Media: Top and sides
are perfectly aligned
The two pages do not align perfectly at the top or sides.
Media Not square: use for ADF skew rework.DO NOT
Print skew correction procedure
1 Check the paper squareness.
2 Make sure that the guides in the paper tray are properly aligned.
3 Check the base printer skew and registration.
4 Plug the printer into the power source, and then power on in Diagnostics Mode (hold down 3 and 6 during
POR).
7462
Repair information
299
To Next Page
Loading...
