Action Yes No
Step 4
Check all connections on the system card assembly, and if
necessary, replace the connections.
Does the problem remain?
Go to step 4. Problem is solved.
Step 5
Replace the redrive motor assembly if problem remains. See
“Redrive assembly removal” on page 374.
Does the problem remain?
Contact next level of
support.
Problem is solved.
230 paper jams
230–239 paper jams
1 To uc h Status/Supplies to identify the location of the jam.
2 Pull the standard tray out.
3 Pull down the bottom rear door.
4 Push the tab down.
7462
Diagnostic information
98
To Next Page
Loading...
