Lexmark 7462 series - Sensor (Offset Stacker bin Full Receive) Removal

Sensor (oset stacker bin full receive) removal
1 Remove the
oset
stacker right cover. Go to
“Oset
stacker right cover removal” on page 448.
2 Remove the two screws (A) securing the sensor (bin full receive).
A
3 Disconnect the harness and remove.
Sensor (oset stacker deflector HP) removal
1 Remove the oset stacker left cover. Go to “Oset stacker left cover removal” on page 449.
2 Disconnect the harness to the sensor (deflector HP).
7462
Repair information
462