Lexmark 7462 series - Accessing the Service Menus

Accessing the service menus
There are
dierent
test menus that can be accessed during POR to identify the problems with the printer.
• Diagnostics menu—This group consists of menus, settings, and operations that are used to diagnose
various printer problems.
Note: While the Diagnostics menu group is active, all host interfaces are oine.
• Configuration menu—This group consists of menus, settings, and operations that are infrequently required
by a user. Generally, the options made available in this menu group are used to configure a printer for
operation.
Accessing the Diagnostics menu
1 Turn
o
the printer.
2 From the operator panel, press and hold the 3 and 6 buttons simultaneously for about 10 seconds.
3 Turn on the printer.
4 Release the buttons after 10 seconds.
Accessing the Configuration menu
1 Turn o the printer.
2 From the operator panel, press and hold the 2 and 6 buttons simultaneously for about 10 seconds.
3 Turn on the printer.
4 Release the buttons after 10 seconds.
Diagnostics menu
Entering the Diagnostics menu
1 Turn o the printer.
2 From the operator panel, press and hold the 3 and 6 buttons simultaneously.
3 Turn on the printer.
4 Release the buttons after 10 seconds.
Registration
Configure this setting to make sure printouts are aligned properly.
1 From the Diagnostics menu, select REGISTRATION.
2 Print a test page. For more information, see “Printing a quick test page” on page 264. Retain this page to
determine the changes you need to make to the margin settings.
7462
Service menus
263