6 Remove the four screws (B) on the right securing the laser cover.
B
7 Remove the sensor (ADF media exit) bracket assembly.
8 Remove the print cartridge cover. Go to “Print cartridge cover assembly removal (model X658)” on
page 355.
9 Remove the laser cover.
LVPS card assembly removal
Warning—Potential Damage: When replacing the LVPS card assembly, ensure that the voltage selection
switch is set to the proper setting, or damage will occur.
1 Remove the rear door assembly. Go to “Rear door assembly removal” on page 368.
2 Remove the right side cover. Go to “Right side cover removal (models X651, X652, X654, and X656)” on
page 332 or “Right side cover removal (model X658)” on page 331.
7462
Repair information
328
To Next Page
Loading...
