Lexmark 7462 series - Page 240

Pick arm motor service check
Action Yes No
Step 1
Check all the connections on the pick arm assembly, and if
necessary, replace the connections.
Does the problem remain?
Go to step 2. The problem is
solved.
Step 2
Check all the connections on the system card assembly, and if
necessary, replace the connections.
Does the problem remain?
Go to step 3. The problem is
solved.
Step 3
Replace the pick arm assembly. Go to
“Pick arm assembly
removal” on page 359.
Does the problem remain?
Contact the next
level of support.
The problem is
solved.
Redrive motor assembly service check
Action Yes No
Step 1
Check all the connections on the redrive motor assembly, and if
necessary, replace the connections.
Does the problem remain?
Go to step 2. The problem is
solved.
Step 2
Check all the connections on the system card assembly, and if
necessary, replace the connections.
Does the problem remain?
Go to step 3. The problem is
solved.
Step 3
Replace the redrive motor assembly. Go to
“Redrive motor
assembly removal” on page 379.
Does the problem remain?
Contact the next
level of support.
The problem is
solved.
7462
Diagnostic information
240