Assembly 15: 250‑Sheet option tray assembly (X651,
X652, X654, and X656)
Asm-index P/N Units/mach Units/FRU Description Removal procedure
1 40X4569 1 1 Complete 250 sheet option tray assembly --
2 40X3447 1 1 250 Sheet pick arm bracket assembly --
3 40X3448 1 1 250 Sheet bellcrank recoil spring --
4 40X4308 2 1 Pick roll assembly (2) --
540X4369 1 1Sensor (media low) --
6 40X4369 1 1 Sensor (media empty) --
7 40X5840 1 1 250 Sheet media out actuator (X651 and
X652)
--
8 40X4570 1 1 Anti-tip latch assembly --
9 40X3453 1 1 250 Sheet option drawer assembly --
10 40X3822 1 1 Media tray catch spring --
11 40X4395 1 1 Media tray roller catch assembly --
12 40X6391 1 1 Media tray assembly, 250 sheet --
13 40X6932 3 1 Tray size sensing actuator --
14 40X4575 1 1 Sensor (pass through) with cable --
15 99A0272 1 1 250 option drive shaft with spring --
16 99A0275 1 1 Spring --
17 40X4572 1 1 Lower interface cable assembly --
18 40X3854 1 1 Media size actuator --
19 40X4574 1 1 250‑sheet tray controller card assembly --
20 40X4571 1 1 Upper interface cable assembly --
7462
Parts catalog
606
To Next Page
Loading...
