Lexmark 7462 series - Page 691

parts catalog legend 572
polygon printhead assembly, theory 657
polygon printhead mechanical registration
adjustment 304
POR sequence 40
power‑on reset sequence 40
print quality
cleaning the scanner glass 569
initial check 42
print quality troubleshooting
background (fog) appears on prints 55
blank pages 44
faint print (low contrast) 42
horizontal stripes (side to side direction) appear
on prints 51
horizontal white stripes and bands (side to side
direction) appear on prints 49
media damage 57
no fuse 58
partial lack check appear on prints 52
repeating defects 44
skewed print 56
solid black pages 46
spots appear on prints 53
vertical lines and bands (process direction) appear
on prints 48
vertical stripes (process direction) appear on
prints 50
print skew correction procedure 299
print tests
print quality test pages 264
print test page 264
printer
configurations 565
models 565
printer control panel 256
indicator light 262
Sleep button light 262
printer messages
1565 Emulation error, load emulation option 202
200–282.yy paper jam 200
283 Staple jam 200
290‑294.yy scanner jam 201
293 Replace all originals if restarting job 201
293.02 Flatbed Cover Open 201
30 Invalid refill, change cartridge 194
31 Replace defective cartridge 194
32 Cartridge part number unsupported by
device 194
34 Short paper 194
35 Insucient memory to support Resource Save
feature 194
37 Insucient memory for Flash Memory
Defragment operation 194
37 Insucient memory to collate job 194
37 Insucient memory, some Held Jobs were
deleted 195
37 Insucient memory, some held jobs will not be
restored 195
38 Memory full 195
39 Complex page, some data may not have
printed 195
42.xy Cartridge region mismatch 195
50 PPDS font error 195
51 Defective flash detected 196
52 Not enough free space in flash memory for
resources 196
53 Unformatted flash detected 196
54 Network <x> software error 196
54 Serial option <x> error 196
54 Standard network software error 196
55 Unsupported option in slot 197
56 Parallel port <x> disabled 197
56 Serial port <x> disabled 197
56 Standard parallel port disabled 197
56 Standard USB port disabled 197
56 USB port <x> disabled 198
57 Configuration change, held jobs were not
restored 198
58 Too many bins attached 198
58 Too many disks installed 198
58 Too many flash options installed 198
58 Too many trays attached 199
59 Incompatible envelope feeder 199
59 Incompatible output bin <x> 199
59 Incompatible tray <x> 199
61 Remove defective disk 199
62 Disk full 199
63 Unformatted disk 200
80 Routine maintenance needed 200
81 Routine Maintenance 200
840.01 Scanner Disabled 201
841‑846 Scanner Service Error 201
88 Cartridge low 200
88.yy Cartridge nearly low 200
88.yy Replace cartridge 200
900–999 Service <message> 201
Answering 184
Busy 184
Call complete 184
Change <src> to <x> 184
Check tray <x> connection 184
Close door or insert cartridge 185
Close finisher side door 185
7462
Index
691