Panasonic FP7 Series Command Reference Manual

(4) Acquiring data other than character string data from the offset position
[S1]... DT0 [S2]... H2 [D1]... DT100 [D2]... DT4000
S2: Acquired data format D1: Offset position D2: Acquired data storage destination
Value Value Value
Example 1 0002H DT100
000BH
(Note 1)
DT4000 0000H
DT4001 0000H
(Note 1) The D1 offset position is updated to the start position of the 3rd data item when the CIPMGET
instruction is issued (3).
Operation result
S1: CIP message receive data D1: Offset position
Value Value
DT0 000DH DT100 000BH→000DH
DT1 00CBH D2: Acquired data
DT2
0000H
Value
DT3 0001H DT4000 1234H
DT4 02H
31H (1) Acquiring data equivalent to 2 bytes
DT4001 0000H
DT5
41H (A)
00H
DT6 34H
42H (B)
DT7 ffH 12H
Offset position after updating
Value
DT0
DT1
1 0
CIP receive data
DT2
3 2
DT3 5 4
1st data
DT4 7
6
DT5
9
8
2nd data
DT6 B
A
DT7 D C
3rd data
■
Flag operations
Name Description
SR7
SR8
(ER)
To be set when the EtherNet/IP function is set to Not Use in the Ethernet unit configuration.
To be set in case of out-of-range in indirect access (index modification).
Set when a value outside the range is specified for the parameter.
17.34 CIPMGET (CIP Message Data Getting)
17-176 WUME-FP7CPUPGR-12

Panasonic FP7 Series Specifications

General

Brand	Panasonic
Model	FP7 Series
Category	Controller
Language	English