2.2 System Programming
100 General Programming
[130] Message Waiting Control
Description
Assigns the data ports which communicate with the Message Waiting Lamp Adaptor Unit
(KX-TD194).
Selection
• Unit (TD194) number:
KX-TD816 –
1
KX-TD1232 –
1 through 6
•Jack number:
KX-TD816 –
02 through 16
KX-TD1232 –
02 through 64
Default
All units – Not stored
Programming
1.
Enter
130
.
Display: 130 MW CONTROL
2.
Press
NEXT
.
Display: MW UNIT NO?
3.
Enter a
unit number
.
To enter unit number 1, you can also press
NEXT
.
Display example: Unit:1 Jack
4.
Enter a
jack number
.
Display example: Unit:1 Jack:05
5.
Press
STORE
.
6.
To programme another unit, press
NEXT
or
PREV
, or
SELECT
and the desired
unit
number
.
7.
Repeat steps 4 and 6.
8.
Press
END
.
Conditions
• The following jacks are not available for this assignment.
Jack 01
The jack for the manager extension
Jacks assigned to voice mail ports
To Next Page
Loading...
