3.3 ISDN Line Programming
ISDN Programming 303
[420] ISDN Ring Service Assignment
Description
Assigns the ISDN ring service type for each outside line.
ISDN
: A call is received using the Direct Dialling In (DDI) or Multiple Subscriber Numbers
(MSN) ringing service which is assigned in programme [425] ISDN Configuration.
Regular
: A call is received using Direct In Lines (DIL) 1:1 or 1:N which are assigned in
programmes [407-408] DIL 1:1 Extension – Day / Night and [603-604] DIL 1:N Extension
and Delayed Ringing – Day / Night.
Selection
• Outside line (CO) number:
KX-TD816 –
01 through 08,
KX-TD1232 –
01 through 24,
( =all outside lines)
•
ISDN / Regular
Default
All outside lines – Regular
Programming
1.
Enter
420.
Display: 420 ISDN RING
2.
Press
NEXT.
Display: CO Line NO?
3.
Enter an
outside line number.
To enter outside line number 01, you can also press
NEXT.
Display example: CO01:Regular
4.
Keep pressing
SELECT
until the desired selection is displayed.
5.
Press
STORE.
6.
To programme another outside line, press
NEXT
or
PREV,
or
SELECT
and the desired
outside line number.
7.
Repeat steps 4 through 6.
8.
Press
END.
Conditions
• For the KX-TD1232, outside lines 01 through 12 are for the Master System and outside
lines 13 through 24 are for the Slave, if available.
To Next Page
Loading...
