2.4 TRS / ARS Programming
154 General Programming
[313] ARS Time
Description
Assigns times for the four Automatic Route Selection (ARS) time schedules. It is possible to
split a day into four time zones (maximum) so that the least expensive line is selected for that
time. According to the service hours and charges offered by your carriers, enter the starting
time of each zone.
Selection
• Day of the week:
1
(Mon) /
2
(Tue) /
3
(Wed) /
4
(Thu) /
5
(Fri) /
6
(Sat) /
7
(Sun) / (all days)
• Time schedule:
A / B / C / D
• Time (hour):
1 through 12 / Disable
(no schedule)
•
AM / PM
Default
All days of the week: A – 8:00 AM; B – 5:00 PM; C – 9:00 PM; D – Disable
Programming
1.
Enter
313
.
Display: 313 ARS TIME SET
2.
Press
NEXT
.
Display: Day of week?
3.
Enter the
day of the week
.
Display example: Mon-A: 8:00 AM
To programme another time schedule, keep pressing
NEXT
or
PREV
until the desired
time schedule is displayed.
4.
Enter the
hour
.
To set no schedule (Disable), press
SELECT
and go to step 6.
If "Disable" is selected, pressing
SELECT
shows the previous stored hour.
To change the current entry, press
CLEAR
and enter the new hour.
5.
Press to select AM / PM.
6.
Press
SELECT
for AM or PM.
7.
Press
STORE
.
8.
To programme another time schedule, keep pressing
NEXT
or
PREV
until the desired time
schedule is displayed.
9.
Repeat steps 4 through 8.
10.
Press
END
.
To Next Page
Loading...
