2.3 Timer Programming
144 General Programming
[218] DISA AA Wait Time
Description
Sets the number of seconds the system waits for a second digit entry. If the timer expires, the
system assumes that the first digit is a DISA (Direct Inward System Access) built-in auto
attendant number if assigned in programme [815] DISA Built-in Automated Attendant
Number.
Selection
Time (seconds):
1 through 5
Default
1 s
Programming
1.
Enter
218.
Display: 218 DISA AA WAIT
2.
Press
NEXT.
Display example: Time:1 sec
3.
Enter the
time.
To change the current entry, enter the new time.
4.
Press
STORE.
5.
Press
END.
Conditions
None
Features Guide References
Direct Inward System Access (DISA)
To Next Page
Loading...
