2.2 System Programming
General Programming 85
[120] User Password
Description
Assigns the password required for entering the User Programming mode.
In the User Programming mode, any display digital proprietary telephone user in the system
can set the Manager Programmings (Programme address: [0XX]).
Selection
Password:
4 through 7 digits
Default
1234
Programming
1.
Enter
120
.
Display: 120 USR PASSWORD
2.
Press
NEXT
.
Display example: Password:1234
3.
Enter a
password
.
To change the current entry, press
CLEAR
and enter the new password.
4.
Press
STORE
.
5.
Press
END
.
Conditions
• The password can be from four to seven digits long, consisting of
0 through 9
.
• If less than four digits are entered, they will not be stored.
• You cannot leave the entry empty.
Features Guide References
System Programming with Proprietary Telephone
To Next Page
Loading...
