Panasonic KX-TD816 - DDI Number; Phantom Extension Number Conversion

3.2 System Programming
294 ISDN Programming
[140] DDI Number / Phantom Extension Number Conversion
Description
Used to convert a Direct Dialling In (DDI) number to a phantom extension number in order to
send an incoming DDI call to a specific extension.
Selection
• Location number:
000 through 128
• DDI number:
1 through 6 digits / Blank
(no number)
Default
All locations – Blank
Programming
1.
Enter
140
.
Display: 140 PHANTOM DDI
2.
Press
NEXT
.
Display: Location NO?
3.
Enter a
location number
.
To enter location number 001, you can also press
NEXT
.
Display example: 001:
4.
Enter a
DDI number
.
To delete the current entry, press
CLEAR
and enter the new number.
To assign no number, press
CLEAR
.
5.
Press
STORE
.
6.
To programme another location, press
NEXT
or
PREV
, or
SELECT
and the desired
location number
.
7.
Repeat steps 4 through 6.
8.
Press
END
.
Conditions
• Each DDI number can be one through six digits, consisting of
0 through 9
.
Features Guide References
Direct Dialling In (DDI)