Panasonic KX-TD816 - ISDN Class of Service

3.4 Extension Programming
ISDN Programming 331
[613] ISDN Class of Service
Description
Programmes a Class of Service (COS) number for each ISDN extension port. The COS
determines the call handling abilities of each port.
Selection
• Port number:
KX-TD816 –
01 through 06,
KX-TD1232 –
01 through 12,
( =all ports)
• COS number:
1 through 8
Default
All ports – COS 1
Programming
1.
Enter
613.
Display: 613 ISDN COS #
2.
Press
NEXT.
Display: Port NO?
3.
Enter a
port number.
To enter port number 01, you can also press
NEXT.
Display example: #01:COS1
4.
Enter a
COS number.
To change the current entry, enter the new number.
5.
Press
STORE.
6.
To programme another port, press
NEXT
or
PREV,
or
SELECT
and the desired
port
number.
7.
Repeat steps 4 through 6.
8.
Press
END.
Conditions
• For the KX-TD1232, port numbers 01 through 06 are for the Master System and 07 through
12 are for the Slave, if available.
• There is a maximum of eight Classes of Services. Each ISDN extension must be assigned
to a Class of Service and is subject to the COS Programming for programmes [5XX] and
[991], bit 5.