2.5 Outside Line Programming
General Programming 183
[407-408] DIL 1:1 Extension – Day / Night
Description
The Direct In Lines (DIL) 1:1 feature allows incoming outside calls to be directed to a specific
extension. When an outside line is assigned as DIL 1:1, it is necessary to assign the destination.
These programmes specify the extension number for day or night mode.
Selection
• Outside line (CO) number:
KX-TD816 –
01 through 08,
KX-TD1232 –
01 through 24,
( =all outside lines)
• Extension number:
2 through 4 digits / Disable
(no DIL 1:1)
Default
All outside lines – Disable (Day / Night)
Programming
1.
Enter a
programme address (407 for day or 408 for night)
.
Display example: 407 DIL 1:1 DAY
2.
Press
NEXT
.
Display: CO Line NO?
3.
Enter an
outside line number
.
To enter outside line number 01, you can also press
NEXT
.
Display example: CO01:Disable
4.
Enter an
extension number
.
To change the current entry, press
CLEAR
and enter the new number.
To disable DIL 1:1, press
CLEAR
.
5.
Press
STORE
.
6.
To programme another outside line, press
NEXT
or
PREV,
or
SELECT
and the desired
outside line number.
7.
Repeat steps 4 through 6.
8.
Press
END.
Conditions
• For the KX-TD1232, outside lines 01 through 12 are for the Master System and outside
lines 13 through 24 are for the Slave, if available. Outside line numbers in the out-of-service
system are unacceptable.
To Next Page
Loading...
