4.4 E1 Line Programming
400 E1 Programming
[784] E1 Group-C
Description
Assigns a signal code for Group-C parameters on the E1 line assigned to MFC-R2.
This programme is available for the KX-TD1232 only.
Selection
• Parameter number:
01
(Group-C ANI(N+1)) /
02
(Group-II ANI)
• Signal code:
00 through 15
(00=Undefined)
Default
All Parameters – 00
Programming
1.
Enter
784
.
Display: 784 GROUP-C
2.
Press
NEXT
.
Display: Parameter NO?
3.
Enter a
parameter number
.
To enter a parameter number 01, you can also press
NEXT
.
Display example: 01:00
4.
Enter the
signal code
.
To change the current entry, press
CLEAR
and enter the new code.
5.
Press
STORE
.
6.
To programme another parameter, press
NEXT
or
PREV
, or
SELECT
and the desired
parameter number
.
7.
Repeat steps 4 through 6.
8.
Press
END
.
Conditions
Adjust to a setting of the connected telephone company.
Features Guide References
E1 Line Service
To Next Page
Loading...
