2.4 TRS / ARS Programming
General Programming 161
[331] ARS Modify Added Number
Description
Determines how the dialled number should be modified before transmitting to the central
office. Assigned numbers are added to the beginning of the dialled number.
Selection
• Modification table number:
1 through 8
• Number to be added:
20 digits (max.)
Default
All modification tables – Not stored
Programming
1.
Enter
331
.
Display: 331 ARS ADD #'S
2.
Press
NEXT
.
Display: Modify Table?
3.
Enter a
modification table number
.
To enter table number 1, you can also press
NEXT
.
Display example: 1:
4.
Enter the
number to be added
.
To delete the current entry, press
CLEAR
.
To change the current entry, press
CLEAR
and enter the new number.
5.
Press
STORE
.
6.
To programme another modification table, press
NEXT
or
PREV
, or
SELECT
and the
desired
modification table number
.
7.
Repeat steps 4 through 6.
8.
Press
END
.
Conditions
• There is a maximum of eight Modification Tables, each of which can be given a number to
be added.
• Each number has a maximum of 20 digits, consisting of
0 through 9
, , #, and
PAUSE
.
Features Guide References
Automatic Route Selection (ARS)
To Next Page
Loading...
