2.5 Outside Line Programming
198 General Programming
[430] DID / TIE Format Number Assignment
Description
Assigns a Direct Inward Dialling (DID) and TIE format number to each outside line group.
Selection
• Outside line group (TRG) number:
1 through 8,
( =all outside line groups)
• DID / TIE format number:
1 through 8
Default
All outside line groups – Not stored
Programming
1.
Enter
430.
Display: 430 MODIFY FORM
2.
Press
NEXT.
Display: TRK GRP NO?
3.
Enter an
outside line group number.
To enter outside line group number 1, you can also press
NEXT.
Display example: TRG1:Not Stored
4.
Enter a
DID / TIE format number.
To change the current entry, press
CLEAR
and enter the new number.
5.
Press
STORE.
6.
To programme another outside line group, press
NEXT
or
PREV,
or
SELECT
and the
desired
outside line group number.
7.
Repeat steps 4 through 6.
8.
Press
END.
Conditions
This is the first and basic programming for the DID / TIE feature. If this assignment is changed,
it will affect other programming ([431] through [435]).
Features Guide References
Direct Inward Dialling (DID)
E1 Line Service
TIE Line Service
To Next Page
Loading...
