2.5 Outside Line Programming
204 General Programming
[434] DID / TIE Added Number
Description
Assigns the added number to the DID and TIE subscriber number which is determined in
programme [433] DID / TIE Subscriber Number Removed Digit. This makes the final
number which serves as the extension number. Note that digits are inserted at the beginning of
the number.
Selection
• DID / TIE format number:
1 through 8
• Number to be added:
4 digits (max.)
Default
All DID / TIE formats – Blank
Programming
1.
Enter
434.
Display: 434 ADD DIAL
2.
Press
NEXT.
Display: DID Format NO?
3.
Enter a
DID / TIE format number.
To enter DID format number 1, you can also press
NEXT.
Display example: 1:
4.
Enter the
number to be added.
To change the current entry, press
CLEAR
and enter the new number.
5.
Press
STORE.
6.
To programme another DID / TIE format, press
NEXT
or
PREV,
or
SELECT
and the
desired
DID / TIE format number.
7.
Repeat steps 4 through 6.
8.
Press
END.
Conditions
• Each added number has a maximum of 4 digits, consisting of
0 through 9.
Features Guide References
Direct Inward Dialling (DID)
E1 Line Service
TIE Line Service
To Next Page
Loading...
