Panasonic KX-TD816 - Caller ID Assignment

2.5 Outside Line Programming
General Programming 181
[406] Caller ID Assignment
Description
Enables the Caller ID feature for the outside lines to which a Caller ID Service is offered by a
Central Office by contract.
Selection
• Outside line (CO) number:
KX-TD816 –
01 through 08,
KX-TD1232 –
01 through 24,
( =all outside lines)
•
Enable / Disable
Default
All outside lines – Disable
Programming
1.
Enter
406.
Display: 406 CALLER ID CO
2.
Press
NEXT.
Display: CO Line NO?
3.
Enter an
outside line number.
To enter outside line number 01, you can also press
NEXT.
Display example: CO01:Disable
4.
Keep pressing
SELECT
until the desired selection is displayed.
5.
Press
STORE.
6.
To programme another outside line, press
NEXT
or
PREV,
or
SELECT
and the desired
outside line number.
7.
Repeat steps 4 through 6.
8.
Press
END.
Conditions
• For the KX-TD1232, outside lines 01 through 12 are for the Master System and outside
lines 13 through 24 are for the Slave, if available.
• To assign all outside lines to one selection, press the key in step 3. In this case, the display
shows the contents programmed for outside line 01.
• The following programmes are used to programme Caller ID feature: [110] Caller ID
Code Set and [111] Caller ID Name Set.