2.7 Extension Programming
General Programming 241
2.7 Extension Programming
[600] EXtra Device Port
Description
EXtra Device Port (XDP) allows a single line telephone (SLT) to be connected to the same jack
as a digital proprietary telephone (DPT). This programme assigns which jacks are XDP. The
SLT and DPT of the programmed jack work as independent extensions.
Selection
• Jack number:
KX-TD816 –
01 through 16,
KX-TD1232 –
01 through 64,
( =all jacks)
•
Disable / Enable
Default
All jacks – Disable
Programming
1.
Enter
600.
Display: 600 XDP PORT
2.
Press
NEXT.
Display: Jack NO?
3.
Enter a
jack number.
To enter jack number 01, you can also press
NEXT.
Display example: #01:Disable
4.
Keep pressing
SELECT
until the desired selection is displayed.
5.
Press
STORE.
6.
To programme another jack, press
NEXT
or
PREV,
or
SELECT
and the desired
jack
number.
7.
Repeat steps 4 through 6.
8.
Press
END.
Conditions
• The eXtra Device Port feature must be assigned "Disable" for console ports.
• For the KX-TD1232, jack numbers 01 through 32 are for the Master System and 33 through
64 are for the Slave, if available.
To Next Page
Loading...
