1.2 Using Proprietary Telephones
Programming Instructions 11
1.2 Using Proprietary Telephones
Soft Buttons and SHIFT Button on the Display DPT
Three soft buttons are provided just below the display of Digital Proprietary Telephones (DPT),
KX-T7433, KX-T7436, KX-T7230 and KX-T7235. The functions of these soft buttons vary as
the programming procedures advance step by step. Those functions that are currently assigned
to the buttons are shown on the lower line of the display. (See "Viewing the Display" in this
section for more information on the display lines.)
If the
SHIFT
button indicator is on, two functions are available with each soft button. To
alternate between the two functions, press the
SHIFT
button on the right side of the display.
Soft button variations
Type 1
Type 2
Type 3
Type 4
Type 5
CLR NEXT
Example:
KX-T7230 Display
Buttons
Soft 1 Soft 2 Soft 3 SHIFT
SKP+ CLR NEXT
Soft 1 Soft 2 Soft 3 SHIFT
SKP- PREV
Soft 1
Press SHIFT
to alternate
Soft 2 Soft 3 SHIFT
SEL+-> NEXT SEL-<- PREV
Soft 1 Soft 2 Soft 3 SHIFT Soft 1
Press SHIFT
to alternate
Soft 2 Soft 3 SHIFT
BAC bac
Soft 1 Soft 2 Soft 3 SHIFT Soft 1
Press SHIFT
to alternate
Soft 2 Soft 3 SHIFT
SKP+ SEL NEXT
Soft 1 Soft 2 Soft 3 SHIFT
SKP- CLR PREV
Soft 1
Press SHIFT
to alternate
Soft 2 Soft 3 SHIFT
To Next Page
Loading...
