4.4 E1 Line Programming
366 E1 Programming
[750] E1 First Dial Timer (DR2 / TIE)
Description
Sets a timer to prevent the first dial being sent too early on the E1 channels assigned to DR2
and E&M.
This programme is available for the KX-TD1232 only.
Selection
Time:
001 through 255
( 32 milliseconds is the actual time)
Default
002
Programming
1.
Enter
750
.
Display: 750 FIRST DL TM
2.
Press
NEXT
.
Display example: 1st Timer:002
3.
Keep pressing
SELECT
until the desired selection is displayed.
4.
Press
STORE
.
5.
Press
END
.
Conditions
Adjust to a setting of the connected telephone company.
Features Guide References
Direct Inward Dialling (DID)
E1 Line Service
TIE Line Service
To Next Page
Loading...
