2.3 Timer Programming
140 General Programming
[214] DISA Prolong Time
Description
Sets the maximum allowable prolonged time for an outside-to-outside line call via the Direct
Inward System Access (DISA) feature. An outside-to-outside line call is initially limited by the
"Outside-to-Outside Line Call Duration Time" (Programme [206]). However, the DISA caller
can prolong the call after hearing the warning tones by pressing any key (except the key).
The DISA prolong time sets the duration of these extended periods.
Selection
Time (minutes):
0 through 7
(0=no prolonging)
Default
3 min
Programming
1.
Enter
214.
Display: 214 DISA PROLONG
2.
Press
NEXT.
Display example: Time:3 min
3.
Enter the
time.
To change the current entry, enter the new time.
4.
Press
STORE.
5.
Press
END.
Conditions
• Do not confuse this parameter with the "Outside-to-Outside Line Call Duration Time"
(Programme [206]) parameter. Programme [206] is used to set the duration time allowed for
an outside-to-outside line call.
• You cannot leave the entry empty.
Features Guide References
Direct Inward System Access (DISA)
To Next Page
Loading...
