2.3 Timer Programming
128 General Programming
[202] Call Forwarding – No Answer Time
Description
Sets the number of rings for the Call Forwarding – No Answer feature. If a call is not answered
after the programmed number of rings, the call is forwarded to the destination.
Selection
Number of rings:
1 through 12
Default
3 rings
Programming
1.
Enter
202
.
Display: 202 CALL FWD-NA
2.
Press
NEXT
.
Display example: Time: 3 rings
3.
Enter the
number of rings.
To change the current entry, press
CLEAR
and enter the new number of rings.
4.
Press
STORE
.
5.
Press
END
.
Conditions
• One ring is equivalent to five seconds.
• This timer is also used for Intercept Routing. If an incoming DISA (Direct Inward System
Access) call to the Intercept Routing destination is not answered before this timer expires,
the call will be disconnected.
• You cannot leave the entry empty.
Features Guide References
Call Forwarding
To Next Page
Loading...
