Panasonic KX-TD816 - Station Programming for DSS Buttons

4.4 E1 Line Programming
356 E1 Programming
[740] E1 Channel Assignment
Description
Assigns a channel type to each E1 channel.
This programme is available for the KX-TD1232 only.
Selection
• E1 channel number:
01 through 30
, ( =All E1 channels)
• Channel type:
DR2 / E&M-C / E&M-P / Disable
Default
All E1 channels – Disable
Programming
1.
Enter
740
.
Display: 740 E1 CH ASSIGN
2.
Press
NEXT
.
Display: CH NO?
3.
Enter a
channel number
.
To enter a channel number 01, you can also press
NEXT
.
Display example: CH01:Disable
4.
Keep pressing
SELECT
until the desired selection is displayed.
5.
Press
STORE
.
6.
To programme another channel, press
NEXT
or
PREV
, or
SELECT
and the desired
channel number
.
7.
Repeat steps 4 through 6.
8.
Press
END
.
Conditions
To assign all channels to one selection, press the key in step 3. In this case, the display shows
the contents programmed for channel 01.
Features Guide References
E1 Line Service