2.4 TRS / ARS Programming
160 General Programming
[330] ARS Modify Removed Digit
Description
Determines how the dialled number should be modified before transmitting to the central
office. You can delete the digits from the beginning of the dialled number.
Selection
• Modification table number:
1 through 8
• Number of digits to be deleted:
0 through 9
(0=no deletion)
Default
All modification tables – 0
Programming
1.
Enter
330
.
Display: 330 ARS REMOVE
2.
Press
NEXT
.
Display: Modify Table?
3.
Enter a
modification table number
.
To enter table number 1, you can also press
NEXT
.
Display example: 1:0
4.
Enter the
number of digits to be deleted
.
To change the current entry, enter the new number.
5.
Press
STORE
.
6.
To programme another modification table, press
NEXT
or
PREV
, or
SELECT
and the
desired
modification table number
.
7.
Repeat steps 4 through 6.
8.
Press
END
.
Conditions
There is a maximum of eight Modification Tables, each of which can be given a number of
digits to be deleted.
Features Guide References
Automatic Route Selection (ARS)
To Next Page
Loading...
