2.3 Timer Programming
General Programming 129
[203] Intercept Time
Description
Sets the number of rings for the Intercept Routing – No Answer (IRNA) feature. If a call is not
answered after the programmed number of rings, the call is redirected to the programmed
extension.
Selection
Number of rings:
3 through 48
Default
12 rings
Programming
1.
Enter
203
.
Display: 203 INTERCEPT
2.
Press
NEXT
.
Display example: Time:12 rings
3.
Enter the
number of rings.
To change the current entry, press
CLEAR
and enter the new number of rings.
4.
Press
STORE
.
5.
Press
END
.
Conditions
• One ring is equivalent to five seconds.
• Programmes [409-410] Intercept Extension – Day / Night are used to programme the
destination of Intercept Routing on an outside line group basis in day and night modes.
• If the original extension has set Call Forwarding – No Answer, Intercept Timer starts after
the Call Forwarding.
• You cannot leave the entry empty.
Features Guide References
Intercept Routing
To Next Page
Loading...
