3.4 Extension Programming
ISDN Programming 335
[616] DDI Number / ISDN Extension Number Conversion
Description
Used to convert a Direct Dialling In (DDI) number to an ISDN extension number in order to
place an incoming DDI call at a specific extension.
Selection
• Port number:
KX-TD816 –
01 through 06
KX-TD1232 –
01 through 12
• DDI Number:
6 digits (max.)
Default
All ports – Blank
Programming
1.
Enter
616
.
Display: 616 ISDN DDI #
2.
Press
NEXT
.
Display: Port NO?
3.
Enter a
port number
.
To enter port number 01, you can also press
NEXT
.
Display: #01:
4.
Enter a
DDI number
.
To delete the current entry, press
CLEAR
.
5.
Press
STORE
.
6.
To programme another floating station, press
NEXT
or
PREV
or
SELECT
and the desired
port number.
7.
Repeat steps 4 through 6.
8.
Press
END
.
Conditions
• There is a maximum of 128 DDI numbers. Each DDI number can be a maximum of six
digits, consisting of
0 through 9
.
• For the KX-TD1232, port numbers 01 through 06 are for the Master System and 07 through
12 are for the Slave, if available.
• To use this programme, "DDI conversion number" must be selected in programme
[990] System Additional Information, Area 06 - bit 13.
To Next Page
Loading...
