2.5 Outside Line Programming
General Programming 215
[444] TIE Receive Dial
Description
Assigns whether the system receives TIE dial numbers on an outside line basis. If "No" is
selected, the dialled number is treated as a local number and sent to DIL 1:1 or DIL 1:N.
Selection
• Outside line (CO) number:
KX-TD816 –
05 through 08,
KX-TD1232 –
09 through 12
(Master),
21 through 24
(Slave),
( =all outside lines)
•
Yes / No
Default
All outside line ports – Yes
Programming
1.
Enter
444
.
Display: 444 RECEIVE DIAL
2.
Press
NEXT
.
Display: CO Line NO?
3.
Enter an
outside line number
.
To enter outside line number 09, you can also press
NEXT
.
Display example: CO09:Yes
4.
Keep pressing
SELECT
until the desired selection is displayed.
5.
Press
STORE
.
6.
Press
END
.
Conditions
To assign all outside lines to one selection, press the key in step 3.
Features Guide References
TIE Line Service
To Next Page
Loading...
