2.4 TRS / ARS Programming
152 General Programming
[311] Special Carrier Access Codes
Description
Assigns special carrier numbers. This allows the system to recognise the user-dialled special
carrier number in order to insert the required pause and apply toll restriction.
Selection
• Location number:
01 through 20
• Special carrier number:
7 digits (max.)
Default
All locations – Not stored
Programming
1.
Enter
311.
Display: 311 CARRIER #
2.
Press
NEXT.
Display: Location NO?
3.
Enter a
location number.
To enter location number 01, you can also press
NEXT.
Display example: 01:Not Stored
4.
Enter a
special carrier number.
To delete the current entry, press
CLEAR.
To change the current entry, press
CLEAR
and enter the new number.
5.
Press
STORE.
6.
To programme another location, press
NEXT
or
PREV
, or
SELECT
and the desired
location number.
7.
Repeat steps 4 through 6.
8.
Press
END.
Conditions
There is a maximum of 20 special carrier numbers. Each carrier number has a maximum of
seven digits, consisting of
0 through 9
, , and
#
. You can also use the PAUSE button to enter
a wild card character. It will be displayed as "X".
Features Guide References
Pause Insertion, Automatic
Toll Restriction
To Next Page
Loading...
