3.3 ISDN Line Programming
ISDN Programming 325
[460] PRI Configuration
Description
Assigns the number of B channels which are actually used out of the 30 PRI line channels. The
CRC4 mode can be also assigned.
This programme is only available for the KX-TD1232 with the Primary Rate Interface ISDN
Expansion Unit (KX-TD290).
Selection
• B channel number:
0 through 30
(0=no use)
•CRC4:
Enable / Disable
Default
B channel number – 0 line; CRC4 – Enable
Programming
1.
Enter
460
.
Display: 460 PRI CONFIG.1
2.
Press
NEXT
.
Display example: Use: 0 Line
3.
Enter the
number of B channels
.
4.
Press
STORE
.
5.
Press
NEXT
to assign the CRC4 mode.
Display example: CRC4:Enable
6.
Keep pressing
SELECT
until the desired selection is displayed.
7.
Press
STORE
.
8.
Press
END
.
Conditions
If the available number of B channels are not assigned as "0 Line", outside lines 9 through 24
will become "No Connect", and the assigned B channel numbers of outside lines starting from
outside line 25 will become "Connect" automatically in programme [400] Outside Line
Connection Assignment.
For example, if the B channel number is assigned as "3", outside lines 25 through 27 will
become "Connect".
Features Guide References
Integrated Services Digital Network (ISDN)
To Next Page
Loading...
