4.4 E1 Line Programming
396 E1 Programming
[780] E1 Group-I
Description
Assigns a signal code for Group-I parameters on the E1 line assigned to MFC-R2.
This programme is available for the KX-TD1232 only.
Selection
• Parameter number:
01
(ANI Start) /
02
(ANI Complete) /
03
(ANI Reject)
• Signal code:
00 through 15
(00=Undefine)
Default
Parameter 01 – 14; Parameter 02 – 15; Parameter 03 – 12
Programming
1.
Enter
780
.
Display: 780 GROUP-I
2.
Press
NEXT.
Display: Parameter NO?
3.
Enter a
parameter number
.
To enter a parameter number 01, you can also press
NEXT
.
Display example: 01:14
4.
Enter the
signal code
.
To change the current entry, press
CLEAR
and enter the new code.
5.
Press
STORE
.
6.
To programme another parameter, press
NEXT
or
PREV
, or
SELECT
and the desired
parameter number
.
7.
Repeat steps 4 through 6.
8.
Press
END
.
Conditions
Adjust to a setting of the connected telephone company.
Features Guide References
E1 Line Service
To Next Page
Loading...
