3.3 ISDN Line Programming
ISDN Programming 319
[429] ISDN Extension Progress Tone
Description
Enables or disables to send the progress tone to ISDN extension on ISDN port basis.
Selection
• Port number:
KX-TD816 –
01 through 06,
KX-TD1232 –
01 through 12,
( =all ports)
•
Enable / Disable
(no tone)
Default
All ports – Disable
Programming
1.
Enter
429
.
Display: 429 ISDN TONE
2.
Press
NEXT
.
Display: Port NO?
3.
Enter a
port number
.
To enter port number 01, you can also press
NEXT
.
Display example: #01:Disable
4.
Keep pressing
SELECT
until the desired selection is displayed.
5.
Press
STORE
.
6.
To programme another port, press
NEXT
or
PREV
, or
SELECT
and the desired
port
number
.
7.
Repeat steps 4 through 6.
8.
Press
END
.
Conditions
• For the KX-TD1232, port numbers 01 through 06 are for the Master System and 07 through
12 are for the Slave, if available.
• To assign all ports to one selection, press the key in step 3. In this case, the display shows
the contents programmed for Port 01.
• After this assignment, you should reset the system to make this assignment effective.
To Next Page
Loading...
