2.5 Outside Line Programming
210 General Programming
[439] TIE Security Type
Description
Assigns the security mode for TIE calls. There are two modes, Non Security and Trunk
Security (Outside line security). Non Security mode allows the caller to access an outside line
without dialling a TIE user code. Trunk Security mode requires the caller to enter a TIE User
Code assigned in programme [017] DISA / TIE User Codes before making a TIE call.
Selection
• Outside line group (TRG) number:
1 through 8,
( =all outside line groups)
•
Non
(Non security) /
Trunk
(Outside line security)
Default
All outside line groups – Non
Programming
1.
Enter
439
.
Display: 439 TIE SECURITY
2.
Press
NEXT
.
Display: TRK GRP NO?
3.
Enter an
outside line group number
.
To enter outside line group number 1, you can also press
NEXT
.
Display example: TRG1:Non
4.
Keep pressing
SELECT
until the desired selection is displayed.
5.
Press
STORE
.
6.
Press
END
.
Conditions
To assign all outside line groups to the same selection, press the key in step 3. In this case,
the display shows the contents programmed for outside line group number 1.
Features Guide References
TIE Line Service
To Next Page
Loading...
