1.2 Using Proprietary Telephones
Programming Instructions 13
Location of Controls with the Overlay
The pictures below show the functions of the buttons of the proprietary telephone while in
programming mode. There are Overlays for the KX-T7400 and KX-T7200 series telephones.
KX-T7436 and KX-T7230 are used for the examples.
Viewing the Display
The display gives you helpful information, such as what you should do now, what you have
done, etc.
The KX-T7433, KX-T7436, KX-T7230 and the KX-T7235 utilise two information lines for
programming. The upper line is called the Message Line and the lower one is called the
Function Line.
The Message Line (upper) shows you what you should do or what you should select. It also
allows you to confirm what you have just entered. The display capacity is 16 digits. If your
entry exceeds the capacity, you can shift the display by pressing or button.
The Function Line (lower) shows the current function of the soft buttons. These functions
change with the programming procedures.
KX-T7436
SHIFT
KX
-
T7436
FLASH
PREV
SELECT
NEXT
SECRET
CLEAR
PAUSEPROGRAM
END
4GHI
7PQRS
5JKL
8TUV
2ABC
6MNO
9WXYZ
3DEF1QZ!?
/+–=<> 0.,’:; #$%&@( )
STORE
1
4
7
5
8
0
2
6
9
3
4GHI
7PRS
5JKL
8TUV
2ABC
6MNO
9WXY
3DEF
FLASHPREV
CLEAR
SELECT
NEXT
SECRET
PAUSE
END
1QZ!?
/+–=<> 0.,’:; #$%&@( )
STORE
KX-T7230
SYS-PGM NO? →
CLR NEXT
SYS-PGM NO? →
CLR NEXT
SYS-PGM NO? →
CLR NEXT
2-Line Display
3-Line Display 6-Line Display
← Message Line
← Function Line
← Message Line
← Function Line
← Message Line
← Function Line
To Next Page
Loading...
