2.2 System Programming
86 General Programming
[121] Walking COS Password
Description
Assigns the password required for Walking COS.
Selection
Password:
4 through 7 digits
Default
1234
Programming
1.
Enter
121
.
Display: 121 COS PASSWORD
2.
Press
NEXT
.
Display example: Password:1234
3.
Enter a
password
.
To change the current entry, press
CLEAR
and enter the new password.
4.
Press
STORE
.
5.
Press
END
.
Conditions
• The password can be from four through seven digits long. Valid numbers are from
0
through 9
.
• If less than four digits are entered, they will not be stored.
• You cannot leave the entry empty.
Features Guide References
Class of Service (COS)
To Next Page
Loading...
