Panasonic KX-TD816 - E1 Sending TIE Caller ID

4.4 E1 Line Programming
354 E1 Programming
[723] E1 Sending TIE Caller ID
Description
Sends a Caller ID on the DTMF (Dual Tone Multi-Frequency) signalling on the E1 channels
assigned to TIE.
This programme is available for the KX-TD1232 only.
Selection
• Outside (CO) line number:
25 through 54,
( = all outside lines from 25 to 54)
•
Yes
(to send)
/ No
(not to send)
Default
All outside lines – No
Programming
1.
Enter
723
.
Display: 723 TIE CALL ID
2.
Press
NEXT
.
Display: CO Line NO?
3.
Enter an
outside line number
.
To enter an outside line number 25, you can also press
NEXT
.
Display example: CO Line NO? 25
4.
Press
NEXT
.
Display example: CO25:No
5.
Keep pressing
SELECT
until the desired selection is displayed.
6.
Press
STORE
.
7.
To programme another outside line, press
NEXT
or
PREV
, or
SELECT
and the desired
outside line number.
8.
Repeat steps 4 through 6.
9.
Press
END
.
Conditions
• This feature is only available between Panasonic PBXs which support a Caller ID on the
DTMF.
• If a PBX code is assigned, "PBX code + extension number" will be sent. If not assigned,
only the extension number will be sent.