Panasonic KX-TD816 - Extension Programming; Extension ANI Number

4.3 Extension Programming
E1 Programming 347
4.3 Extension Programming
[622] Extension ANI Number
Description
Assigns the identification number of the calling party to utilise the Automatic Number
Identification (ANI) feature provided by the E1 line service.
This programme is available for the KX-TD1232 only.
Selection
• Jack number:
01 through 64 (-1/-2),
( =all jacks, -1 = first part, -2 = second part)
• ANI number:
16 digits (max.)
Default
All jacks-1/2 – Not stored
Programming
1.
Enter
622
.
Display: 622 EXT ANI NO
2.
Press
NEXT
.
Display: Jack NO?
3.
Enter a
jack number
.
To enter jack number 01, you can also press
NEXT.
To select the second part (-2), press
NEXT
after entering the jack number.
Display example: #01-1:Not Stored
4.
Enter the
ANI number
.
To delete the current entry, press
CLEAR
.
To change the current entry, press
CLEAR
and enter the new number.
5.
Press
STORE
.
6.
To programme another jack, press
NEXT
or
PREV
, or
SELECT
and the desired
jack
number
.
7.
Repeat steps 4 through 6.
8.
Press
END
.
Conditions
• Each number has a maximum of 16 digits, consisting of
0 through 9
.
• Jack numbers 01 through 32 are for the Master System and 33 through 64 are for the Slave,
if available.