2.3 Timer Programming
130 General Programming
[204] Pickup Dial Waiting Time
Description
Sets the number of seconds for Pickup Dialling. If the telephone user lifts the handset, the
programmed party is called when the time expires.
Selection
Time (seconds):
1 through 5
Default
1 s
Programming
1.
Enter
204
.
Display: 204 PICKUP DIAL
2.
Press
NEXT
.
Display example: Time:1 sec
3.
Enter the
time.
To change the current entry, enter the new time.
4.
Press
STORE
.
5.
Press
END
.
Conditions
• This time gives the user an opportunity to dial digits before the automatic dialling process
takes place.
Features Guide References
Pickup Dialling
To Next Page
Loading...
