Panasonic KX-TD816 - Station Features and Operation

2.2 System Programming
General Programming 91
[124] Phantom Extension Number Set
Description
Assigns the phantom extension numbers. Each number will be assigned to a flexible CO or
DSS (Direct Station Selection) button and used as a Phantom Extension button.
Selection
• Location number:
001 through 128
• Phantom extension number:
2 through 4 digits
Default
All locations – Not stored
Programming
1.
Enter
124
.
Display: 124 PHANTOM #
2.
Press
NEXT
.
Display: Location NO?
3.
Enter a
location number
.
To enter location number 001, you can also press
NEXT
.
Display example: 001:Not Stored
4.
Enter a
phantom extension number
.
To delete the current entry, press
CLEAR
.
To change the current entry, press
CLEAR
and enter the new number.
5.
Press
STORE
.
6.
To programme another location, press
NEXT
or
PREV
, or
SELECT
and the desired
location number
.
7.
Repeat steps 4 through 6.
8.
Press
END
.
Conditions
• Each phantom extension number has two through four digits, consisting of numbers
0
through 9
.
• The first one or two digits of the phantom extension numbers are subject to programme
[100] Flexible Numbering, (01) through (16) 1st through 16th hundred extension blocks.
• Phantom extension numbers and other extension numbers should be different. Double entry
and incompatible entry for these numbers are invalid. Valid entry example: 10 and 11, 10
and 110. Invalid entry example: 10 and 106, 210 and 21.