2.3 Timer Programming
General Programming 127
[201] Transfer Recall Time
Description
Sets the number of rings before transfer recall occurs. If a transferred call is not answered after
the programmed number of rings, the call returns to the original caller.
Selection
Number of rings:
0 through 48
(0=Transfer Recall disabled)
Default
12 rings
Programming
1.
Enter
201
.
Display: 201 TRAN RECALL
2.
Press
NEXT
.
Display example: Time:12 rings
3.
Enter the
number of rings.
To change the current entry, press
CLEAR
and enter the new number of rings.
4.
Press
STORE
.
5.
Press
END
.
Conditions
• One ring is equivalent to five seconds.
• You cannot leave the entry empty.
• Operator 1 can also be the Transfer Recall destination, which can be assigned in programme
[990] System Additional Information, Area 02-Bit 1.
Features Guide References
Call Transfer
To Next Page
Loading...
