2.2 System Programming
General Programming 95
[126] Caller ID Modification for Local Call
Description
Assigns removed digits from the received caller's number of a local call, and adds number to
make the final number which serves as the Caller ID number. The system records the modified
caller's number to the incoming call log list so that the extension user can call back the caller.
Digits are removed from or added to the beginning of the received digits.
Selection
• Location number:
01 through 10
• Number of digits to be deleted:
0 through 9
(0=no deletion)
• Number to be added:
4 digits (max.)
Default
All locations – Deleted number = 0, Added number = Blank
Programming
1.
Enter
126
.
Display: 126 CID LOCAL
2.
Press
NEXT
.
Display: Location NO?
3.
Enter a
location number
.
To enter location number 01, you can also press
NEXT
.
Display example: 01:Del0,Add
4.
Enter the
number of digits to be deleted
.
To change the current entry, press
CLEAR
and enter the new number.
5.
Press to programme the number to be added, if required.
6.
Enter the
number to be added
.
To change the current entry, press
CLEAR
and enter the new number.
7.
Press
STORE
.
8.
To programme another location number, press
NEXT
or
PREV
, or
SELECT
and the
desired
location number
.
9.
Repeat steps 4 through 8.
10.
Press
END
.
Conditions
• The added number has a maximum of 4 digits, consisting of
0 through 9,
and #.
To Next Page
Loading...
